• Wenn du ebenfalls von dem Problem betroffen bist, dass dir die mögliche Maximalstärke über Bluetooth zu gering erscheint, so findest du hier evtl. eine Lösung, bzw. einen derzeitigen Workaround. ==> Lautstärke über Bluetooth zu gering <==

Mi Mix Xiaomi Mi Mix startet nicht

Benni

Reisbauer
Hallo zusammen
Ich bin neu hier. Habe gestern mein neues Mi Mix bekommen.
Akku war vollkommen entladen. Habe es über Nacht aufgeladen. Beim starten leuchtet nur das Mi Logo und es tut sich nichts mehr.
Was muss ich machen? Bitte um Hilfe?
Viele Grüsse
Benni
 

ambros53

Drachenjäger
Re: Xiami Mi Mix startet nicht

Erstmal herzlich willkommen hier. Möglicherweise tiefentladen - dann richtig lange (24Std.) ans Ladegerät. Wenn Du das Gerät an den PC anschliesst - wird es erkannt, oder passiert gar nichts? Kommst Du in den Fastboot-Modus (Anschalttaste und Leisertaste gleichzeitig drücken). Wenn ja, erkennt der PC das Gerät im Mi-Flash-Tool.
 

Virus

Circle of friends
Re: Xiami Mi Mix startet nicht

Tiefenentladen glaub ich nicht sonst würde auch kein Mi logo zu sehen sein.
 

Benni

Reisbauer
Re: Xiami Mi Mix startet nicht

Muss ich im mi flash tool was machen?
Darf ich das überhaupt wegen garantie?
Bitte um info da ich gar keine ahnung habe.
Bitte wenn es geht auch um anleitung was ich machen soll?
 

Tetzi

Ming Dynastie
Da wird beim flashen was schief gelaufen sein bei GB. Das flash tool kann ohne bedenken genutzt werden.
 

Teckler

Reisbauer
@Benni tut sich wieder was?
Hast Du auch ein 256GB 18k Gerät aus der gearbest Aktion? Falls ja können wir uns gern hier austauschen wie die shoprom wegzubekommen ist
Mein Gerät hängt noch in England und sollte bald eintrudeln
Hast Du schon versucht zu updaten oder war das Gerät schon aus der Box tot?

Grüße
 

Benni

Reisbauer
Hallo Teckler
Ja genau das habe ich aus der aktion hatte mich gefreut das es in nur 6 tagen angekommen ist. Bis jetzt bin ich nicht weitergekommen kriege das handy nich ungelockt. Ich hoffe für dich das du nicht das mit dem gleichen macken bekommst. Ich habe gearbest auch kontaktiert und die wollen sich anfang der woche melden. Werde dich auf dem laufenden halten. Vg benni
 

Teckler

Reisbauer
Danke Benni.... wäre prima wenn wir uns zusammen kümmern könnten
Nochmal die Frage.... hast Du schon etwas geflasht oder versucht zu unlocken?
Hab nämlich schon gelesen daß unlocken nur mit der Chinaversion gehen soll... tlw ist das aber wohl sehr vom Versionsstand abhängig
Was hast denn für eine Version drauf?
Vielleicht musst auch gar nicht entsperren und kannst direkt auf die Global Stable gehen... Siehe Methode 1 und 2 im flashing guide
http://en.miui.com/download-317.html
 

voth99

Foren Moderator
Moderator
Benni hat gesagt.:
Bis jetzt bin ich nicht weitergekommen kriege das handy nich ungelockt. Vg benni

wird denn ein Fehler angezeigt oder waspassiert denn?
AUf welcher miui - Version bist du denn?
Könntest du eventuell einen Screenshot machen und hier einstellen.
 

Benni

Reisbauer
Hallo zusammen
ein Rom bekomme ich nicht drauf deswegen hatte ich versucht das Handy zu unlocken dies hat aber auch nicht geklappt.
so habe ich es versucht zu unlocken:

C:\Minimal ADB and Fastboot>fastboot device
usage: fastboot [ <option> ] <command>

commands:
update <filename> Reflash device from update.zip.
Sets the flashed slot as active.
flashall Flash boot, system, vendor, and --
if found -- recovery. If the device
supports slots, the slot that has
been flashed to is set as active.
Secondary images may be flashed to
an inactive slot.
flash <partition> [ <filename> ] Write a file to a flash partition.
flashing lock Locks the device. Prevents flashing.
flashing unlock Unlocks the device. Allows flashing
any partition except
bootloader-related partitions.
flashing lock_critical Prevents flashing bootloader-related
partitions.
flashing unlock_critical Enables flashing bootloader-related
partitions.
flashing get_unlock_ability Queries bootloader to see if the
device is unlocked.
flashing get_unlock_bootloader_nonce Queries the bootloader to get the
unlock nonce.
flashing unlock_bootloader <request> Issue unlock bootloader using request
.
flashing lock_bootloader Locks the bootloader to prevent
bootloader version rollback.
erase <partition> Erase a flash partition.
format[:[<fs type>][:[<size>]] <partition>
Format a flash partition. Can
override the fs type and/or size
the bootloader reports.
getvar <variable> Display a bootloader variable.
set_active <slot> Sets the active slot. If slots are
not supported, this does nothing.
boot <kernel> [ <ramdisk> [ <second> ] ] Download and boot kernel.
flash:raw boot <kernel> [ <ramdisk> [ <second> ] ]
Create bootimage and flash it.
devices [-l] List all connected devices [with
device paths].
continue Continue with autoboot.
reboot [bootloader] Reboot device [into bootloader].
reboot-bootloader Reboot device into bootloader.
help Show this help message.

options:
-w Erase userdata and cache (and format
if supported by partition type).
-u Do not erase partition before
formatting.
-s <specific device> Specify a device. For USB, provide ei
ther
a serial number or path to device por
t.
For ethernet, provide an address in t
he
form <protocol>:<hostname>[:nene:ort] whe
re
<protocol> is either tcp or udp.
-p <product> Specify product name.
-c <cmdline> Override kernel commandline.
-i <vendor id> Specify a custom USB vendor id.
-b, --base <base_addr> Specify a custom kernel base
address (default: 0x10000000).
--kernel-offset Specify a custom kernel offset.
(default: 0x00008000)
--ramdisk-offset Specify a custom ramdisk offset.
(default: 0x01000000)
--tags-offset Specify a custom tags offset.
(default: 0x00000100)
-n, --page-size <page size> Specify the nand page size
(default: 2048).
-S <size>[K|M|G] Automatically sparse files greater
than 'size'. 0 to disable.
--slot <slot> Specify slot name to be used if the
device supports slots. All operations

on partitions that support slots will

be done on the slot specified.
'all' can be given to refer to all sl
ots.
'other' can be given to refer to a
non-current slot. If this flag is not

used, slotted partitions will default

to the current active slot.
-a, --set-active[=<slot>] Sets the active slot. If no slot is
provided, this will default to the va
lue
given by --slot. If slots are not
supported, this sets the current slot

to be active. This will run after all

non-reboot commands.
--skip-secondary Will not flash secondary slots when
performing a flashall or update. This

will preserve data on other slots.
--unbuffered Do not buffer input or output.
--version Display version.
-h, --help show this message.

C:\Minimal ADB and Fastboot>fastboot oem device-info
...
(bootloader) Device tampered: false
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
OKAY [ 0.070s]
finished. total time: 0.071s

C:\Minimal ADB and Fastboot>fastboot oem unlock
...
FAILED (remote: Token verification failed, reboot the device)
finished. total time: 0.030s

C:\Minimal ADB and Fastboot>fastboot oem device-info
...
(bootloader) Device tampered: false
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: false
(bootloader) Display panel:
OKAY [ 0.070s]
finished. total time: 0.072s

C:\Minimal ADB and Fastboot>
 

Benni

Reisbauer
hallo pareh das habe ich schon versucht klappt leider nicht
es kommt immer "can not found file flash all expept storage.bat"
 

balu_baer

Foren-Admin
Administrator
Bei "can not found file ..." werde ich immer hellhörig:
bitte prüfe, dass keine Leer- oder Sonderzeichen/Umlaute im Pfad vorkommen und korrigiere ggfs.

:W
Viel Erfolg!
MARCO
 
Oben Unten